Installation of an ÖK Becrisa toilet seat cover

Installing an ÖK Becrisa toilet seat is a relatively simple process, but it requires attention to detail to ensure a proper and durable fit. Choosing a quality lid not only improves the aesthetics of the bathroom, but can also contribute significantly to comfort and hygiene. Below is a step-by-step procedure for installing an ÖK Becrisa toilet seat:


Step 1: Preparation

Before you begin, it is important to gather all the necessary tools.For the installation of the ÖK Becrisa toilet seat, you will need a screwdriver, possibly a hammer (if plastic plugs are included) and the instructions provided by the manufacturer. Also, make sure the area around the toilet is clean and clear for easy access.


Step 2: Remove the old lid

If a toilet seat cover is already installed, you will need to remove it first. Most lids are held in place by hinges that are attached to the back of the toilet seat with screws.Use the screwdriver to loosen and remove these screws. Once removed, lift the lid and toilet seat off the toilet to remove them completely.


Step 3: Inspection and Cleaning

Before installing the new lid, inspect the toilet area to make sure there is no damage or obstructions that could affect the installation. Clean any debris or dirt with a mild cleaner and a damp cloth.


Step 4: Fitting the lid

Place the new ÖK Becrisa toilet lid onto the toilet seat, correctly aligning the mounting holes with the bolts on the toilet bowl. Make sure the lid is centered and level before proceeding.


Step 5: Attaching the hinges

Once the lid is in place, proceed to attach the hinges. Insert the supplied screws through the holes in the hinges and thread the nuts into the bottom of the toilet to secure them. Tighten the screws evenly to avoid misalignment.


Step 6: Final Adjustment

After securing the hinges, make a final adjustment to ensure that the lid is tight and level. Test by lifting and lowering the lid several times to make sure it is working properly and there is no play.

Step 7: Stability check

Once the lid is installed, check its stability and strength. Apply a little pressure on the lid to make sure it is properly secured and does not move or wobble.


Step 8: Cleaning and maintenance

After completing the installation, clean any fingerprints or surface stains with a soft, damp cloth. In addition, follow the manufacturer’s recommendations for regular maintenance of the ÖK Becrisa toilet seat, which may include cleaning with bathroom-specific products.


In summary, installing an ÖK Becrisa toilet seat is a relatively simple process that can be completed with basic tools and a little attention to detail. By following these steps, you can enjoy a new toilet seat that improves both the aesthetics and functionality of your bathroom.

Ahora puedes comprar Inodoros ÖK Becrisa al mejor precio en Reforma y Decora: